Water Systems for Fairgrounds, Arenas, and Event Barns
Share
Water Systems for Fairgrounds, Arenas, and Event Barns
Fairgrounds, rodeo arenas, and event barns have an unusual water problem: they sit quiet for weeks, then fill with animals, exhibitors, and visitors over a single weekend. The water system has to work the first time, with exhibitors who have never seen it before and without a staff member standing beside every trough.
Built for Peak Weekends, Not Daily Routine
Temporary pens, stall rows, and wash racks all need water that refills itself. An automatic float valve holds the level without anyone adjusting it, so a trough that gets drained by thirsty cattle in the afternoon is full again by evening. For stall buckets and smaller tubs, Rojo handles 4-7 GPM and is simple enough that a first-time exhibitor can see how it works at a glance. For rows of large livestock troughs, Megaflow is built specifically for the livestock industry. It delivers up to 65 GPM on a 3/4-inch inlet and up to 90 GPM on 1-inch and 1.25-inch inlets at higher pressures, with typical installations averaging closer to 50 GPM. Not sure which fits? The valve line comparison lays them side by side.
Livestock and Crowds Are Hard on Equipment
Public venues see more rough handling than a private barn: animals shoving, kids poking at anything with a moving part. The Protect-A-Mount shields the valve from contact damage. It fits 3/4-inch Rojo and Topaz valves and requires the long detach tail, so check your valve before ordering. Here's the full rundown on how it mounts and what it doesn't do.
Flexible Water Points for Temporary Setups
Event layouts change from show to show. With a Detach-equipped valve, you can remove the valve body with a quarter turn and plug in the Connect Quick Coupling to turn the same fixture into a hose connection for wash racks or washdown. We cover the idea in this post on mobile water points.
Off-Season Planning
Many venues sit unused through winter, which is when freeze damage happens. Our pre-freeze checklist is a good starting point, and Frost Pro is an inexpensive add-on for valves in exposed locations. Before the next event season, inspect each valve and keep a few service kits on hand so a worn diaphragm doesn't become a problem on show weekend.
Planning Your Venue
Stalls and arena barns have their own considerations; see our post on equestrian boarding facilities. For help matching valves to your layout, contact us and we'll help you size it.